Company Profile
we have hydrogen production compressors, filling compressors, and hydrogen refueling station compressors to achieve full coverage of hydrogen energy compressors, one-stop supply and service. The displacement of a single hydrogen production compressor can reach 2000Nm3/min, the displacement of a single filling compressor can reach 2000Nm3/h, and the displacement of a single compressor at a hydrogen refueling station can reach 2000Nm3/h, fully covering compressors in the hydrogen energy industry need.
Product Description
Piston compressors are a type of positive displacement compressor that are commonly used in the chemical industry for a variety of applications. These compressors work by using a piston and cylinder to compress gas or air, which creates pressure and allows it to be transported through pipelines or used in other processes.
In the chemical industry, piston compressors are used for a variety of functions, including:
Gas compression - Piston compressors are used to compress natural gas, hydrogen, and other gases used in chemical processes.
Pneumatic conveying - Piston compressors are used to transport materials in a powdered or granular form through pipelines.
Refrigeration - Piston compressors are used in refrigeration systems to compress refrigerant gases, which are then used to cool industrial processes and equipment.
Process air compression - Piston compressors are used to compress air for use in chemical processes, such as in pneumatic equipment and air-powered tools.
Piston compressors are popular in the chemical industry because they are reliable, efficient, and can handle specific types of gases and air with ease. Additionally, they require minimal maintenance and can operate at high pressures, making them suitable for many applications
When choosing a piston compressor for use in the chemical industry, it is important to consider factors such as:
Type of gas or air being compressed - Different types of gases and air require different types of compression.
Required flow rate and pressure - The capacity and pressure capabilities of the compressor must meet the requirements of the application.
Environmental conditions - Factors such as temperature, humidity, and altitude can affect the performance of the compressor.
Maintenance requirements - The frequency and complexity of maintenance and servicing should be considered when selecting a compressor.
Overall, piston compressors are an important tool in the chemical industry, providing reliable and efficient compression for a variety of applications. Choosing the right compressor for the specific application is critical to ensuring optimal performance and efficiency.
Product Parameters
The machine is customized according to customer need, the specific price depends on the configuration requirements (gas composition, exhaust volume and pressure).quotation will be given according the specific parameters.
Piston compressor model parameters
| Piston force |
800 |
500 |
320 |
250 |
160 |
100 |
65 |
45 |
30 |
| Types of compressed gas |
Hydrogen, nitrogen, natural gas, ethylene, propylene, coal gas, hydrogen chloride, hydrogen fluoride, carbon dioxide, methyl chloride, carbon monoxide, acetylene ammonia, hydrogen monochloride, difluoromethane, tetrafluoroethylene, pentafluoroethylene, hexafluoroethylene, etc. |
| Discharge pressureMPa(G) |
<=25 |
|
<=30 |
| Compression levels |
1-4levels |
2-6levels |
1-3levels |
| Number of columns |
2--4 |
2--6 |
1--4 |
| Layout form |
M/D |
M/D |
M/D |
M/D |
M/D |
M/D/P |
M/D/P |
M/D/P |
L/P |
| Route(mm) |
280-360 |
240-320 |
180-240 |
200 |
| Rotating speed(rpm) |
300-375 |
333-450 |
375-585 |
420-485 |
| Maximum motor power(KW) |
5600 |
3600 |
3300 |
2700 |
1250 |
800 |
560 |
250 |
75 |
| Skid mounted |
non-skid mounted |
skid mounted/non -skid mounted |
| Digital Analog Computing |
yes |
| Systolic algorithm |
yes |
| Test |
According to the quality standard, chemical analysis, mechanical performance, flaw detection, hydrostatic test, airtight test and other inspections are carried out for each component |
| Factory inspection |
According to the quality standard, carry out no-load mechanical operation test |
| Customer acceptance |
Actual working conditions, 72-hour assessment and acceptance |
| Application |
Hydrogen energy, silicon, fluorine chemical industry, petrochemical industry, metallurgy, medicine, aerospace, nuclear power |
Diaphragm compressor model parameters
| |
|
|
|
|
|
|
|
|
|
| Piston force |
250 |
160 |
110 |
80 |
60 |
45 |
35 |
45 |
10 |
| Types of compressed gas |
Hydrogen, nitrogen, oxygen, helium, xenon, hydrogen chloride, hydrogen sulfide, nitrogen trifluoride, silicon tetrafluoride, silane |
| Discharge pressureMPa(G) |
<=100 |
| Compression levels |
1-3levels |
| Layout form |
M/D |
D/L |
D/L/Z |
V/Z |
L/Z |
L/Z |
| Route(mm) |
210 |
210/1/0 |
180 |
180 |
150 |
130 |
130 |
105 |
70 |
| Rotating speed(rpm) |
260 |
360-420 |
| Maximum motor power(KW) |
355 |
250 |
200 |
160 |
110 |
55 |
30 |
22 |
18.5 |
| Skid mounted |
skid mounted |
| Digital Analog Computing |
yes |
| Systolic algorithm |
According to demand |
| Test |
According to the quality standard, chemical analysis, mechanical performance, flaw detection, hydrostatic test, airtight test and other inspections are carried out for each component |
| Factory inspection |
Carry out nitrogen or air full-load mechanical operation test according to quality requirements |
| Customer acceptance |
Actual working conditions, 72-hour assessment and acceptance |
| Application |
Hydrogen energy, silicon, fluorine chemical industry, petrochemical industry, metallurgy, medicine, aerospace, nuclear power |
Hydrogen gas production compressor
| parameter industry |
hydrogen from natural gas |
Hydrogen from coke oven gas |
Chemical tail gas recovery |
Fluorine alkali tail gas recovery |
other |
| Suction pressure MPa(G) |
0-0.5 |
0-0.2 |
0-1.0 |
0-0.1 |
|
| discharge pressureMPa(G) |
1.0-3.0 |
0.8-2.3 |
1.5-3.0 |
0.8-2.5 |
|
| capacity Nm3/min |
5-50 |
10-200 |
10-200 |
8-100 |
|
| Compression levels |
1-3 |
1-4 |
1-6 |
1-5 |
1-6 |
| motor power(KW) |
30-2000 |
| skid mounted |
skid mounted |
| Digital Analog Computing |
yes |
| systolic algorithm |
yes |
| Service Guarantee |
Professional service team, 7X24 hours all day service |
Hydrogen filling compressor + hydrogen refueling station compressor
| parameter industry |
45Mpahydrogen refueling station |
90Mpa hydrogen refueling station |
Hydrogen tank truck |
Hydrogen flushed into the bottle |
High pressure hydrogen delivery |
| Suction pressure MPa(G) |
3-20 |
10-30 |
0.8-3.0 |
0.1-30 |
0.8-3.0 |
| discharge pressureMPa(G) |
45 |
90 |
20.0-22.20 |
15.0-20.0 |
5.2-20.0 |
| capacity Nm3/min |
200-2000 |
100-1000 |
300-2000 |
10-800 |
100-1500 |
| Compression levels |
1-2 |
1-2 |
1-3 |
1-2 |
1-2 |
| motor power(KW) |
30-200 |
30-185 |
75-315 |
3-160 |
22-200 |
| skid mounted |
skid mounted |
| Digital Analog Computing |
yes |
| Finite Element Analysis |
yes |
| Service Guarantee |
Professional service team, 7X24 hours all day service |
|
|
|
|
Detailed Photos
After Sales Service
In addition to the high-quality performance of our products, we also attach great importance to providing customers with comprehensive services. We have an independent service operation and maintenance team, providing customers with various support and services, including technical support, debugging services, spare parts supply, renovation and upgrading, and major maintenance. We always adhere to the principle of customer-centrism, ensuring the safe and stable operation of customer equipment. Our service team is committed to providing reliable support for customers' operations 24/7.
Training plan
Technical training is divided into two parts: company training and on-site training.
1)Company training
Before the unit is delivered, that is during the unit assembly period, users will be provided with a one-week on-site training by the company. Provide local accommodation and transportation facilities, and provide free venues, teaching materials, equipment, tools, etc. required for training. The company training content is as follows:
The working principle, structure and technical performance of the unit.
Unit assembly and adjustment, unit testing.
Operation of the unit, remote/local operation, manual/automatic operation, daily operation and management, familiar with the structure of each system of the unit.
Routine maintenance and upkeep of the unit, and precautions for operation and maintenance.
Analysis and troubleshooting of common faults, and emergency handling methods.
2) On-site training
During the installation and trial operation of the unit, on-site training will be conducted to teach the principles, structure, operation, maintenance, troubleshooting of common faults and other knowledge of the unit, so as to further become familiar with the various systems of the unit, so that the purchaser can independently and correctly operate the unit. Operation, maintenance and management.
){kind=link}